Описание
PF3A*H, Датчик расхода воздуха для пневматических магистралей
- Среда: очищенный сжатый воздух, азот
- Диапазоны расхода: 30~3000, 60~6000 и 120~12000 литр/мин
- Диапазон давлений: от 0.1 до 1.5 МПа
- Точность: +/-3.0% от полного диапазона
- IP65
Технические характеристики
- Номинальный диапазон расхода 12 (от 120 до 12000 л/мин)
- Тип резьбы F [G (соответствует ISO 1179-1)]
- Присоединительный размер 20 (2)
- Тип выхода FS (Вых.: PNP; тип: аналоговый выход (по току) <-> внешний вход)
- Кабель N (без кабеля)
- Единицы измерения M (только единицы СИ)
- Поверочный сертификат Нет, сертификат на английском и японском языках
- Максимальная температура среды 50 ºC
- Минимальная температура среды 0 ºC
- Proof pressure 2.25 MPa
- Электропитание 24 VDC ±10 %
- Сертификация CE marking (EMC Directive, RoHS Directive)
- Response time Select from 1 s, 2 s, or 5 s
- Internal voltage drop PNP output type: 2 V or less (at load current of 80 mA)
- Current consumption 150 mA or less
- Operating humidity range Operating/Stored: 35 to 85 % RH (No condensation)
- Enclosure IP65
- Repeatability Switch output/Display: ±1.0 % F.S Analogue output: ±1.0 % F.S
- Applicable fluid Air, Nitrogen
- Rated pressure range 0.1 to 1.5 MPa
- Maximum load current 80 mA
- Fluid contact material Aluminum alloy, PPS, HNBR [Sensor: Pt, Au, Fe, Lead glass (exempted from the RoHS application), Al2O3]
- Operating temperature range Operating: 0 to 50 °C, Stored: -10 to 60 °C (No freezing or condensation)
- Smallest settable increment 10 l/min
- Max. applied voltage 28 VDC
- Hysteresis mode Variable from 0
- Display LCD, 2-screen display (Main screen/Sub screen) Main screen: Red/Green, Sub screen: Orange Main screen: 5 digits, 7 segment, Sub screen: 6 digits, 7 segment
- Display accuracy ±3.0 % F.S.
- Indicator light OUT indicator: Red LED is ON when output is ON
- Withstand voltage 1000 VAC for 1 minute between terminals and housing
- Insulation resistance 50 MΩ (500 VDC measured via megohmmeter) between terminals and housing
- Maximum fluid temperature 50 °C
- Minimum fluid temperature 0 °C
- Flow detection method Thermal type
- Set point range Instantaneous flow 120 to 12600 l/min